Skip to content
Greenville Plumbing Help

Running, rocking, leaking and clogging

Toilet repair and replacement in Greenville, SC

Most toilet trouble comes from a handful of cheap parts inside the tank or under the base. The plumber's job is to find which one, and to tell you honestly if the toilet itself has reached the end.

A toilet that will not stop running

Take the tank lid off and look. If water is pouring into the overflow tube in the middle, the fill valve is not shutting off. If the level is fine but the tank refills every so often on its own, the flapper at the bottom is leaking.

Both parts are standard. The water keeps running into the sewer until one is replaced, and that shows up on the bill.

Illustration: the inside of a toilet tank, with the fill valve, the overflow tube and a worn flapper letting water seep into the bowl.
Water seeping past a worn flapper drains slowly into the bowl, so the fill valve keeps topping the tank up. If the water level sits above the top of the overflow tube instead, the fill valve is set too high or is failing.

Water on the floor

Around the base

Water seeping from under the toilet after flushing means the wax seal between the toilet and the drain has failed. Do not keep using it: dirty water is soaking the subfloor. The toilet has to come up and a new seal goes in.

Behind or under the tank

Drips from the supply hose, the shut-off valve on the wall, or the bolts holding the tank to the bowl are easier repairs. Close the valve behind the toilet, clockwise, and dry it off to see which one is wet.

A toilet that rocks or keeps clogging

A toilet that moves when you sit on it will break its seal sooner or later. The bolts may need tightening or the flange in the floor may be broken. Shims hide the movement; they do not fix a broken flange.

Clogging every week usually means something is lodged in the trapway, such as a toy or a cleaning tool, or the drain beyond is partly blocked. If other drains are slow too, read drain cleaning.

Replacing the toilet

Questions that make the new one fit and work.

  • What is the rough-in measurement, from the wall to the floor bolts, so the new toilet fits?
  • Is the shut-off valve on the wall in good shape, or should it be replaced while the water is off?
  • Will the new toilet cover the old floor marks and bolt holes?
  • Is taking the old toilet away included?

Toilet questions

Does putting a toilet back on a new wax seal need a permit?

Greenville's permit rules list removing and reinstalling a toilet among the jobs that need none, as long as no pipes, valves or fixtures are replaced or rearranged.

Should I use the toilet while waiting?

Not if it leaks at the base or other drains are backing up. A running toilet can be used; close the valve behind it between flushes to save water.

Ready to get it looked at?

Mention the room, the symptom and whether you managed to stop the water. Whoever picks up runs an independent firm and decides for themselves if the job suits them and what visit time they can offer.

Reach a Greenville-area plumbing firm

Homeowners and renters with trouble in their own pipes, drains, fixtures or tank.

Call (864) 555-0136

Recording may be switched on. Money changing hands for referrals: disclosure. Your details: privacy.

Call (864) 555-0136